الوصف

Introduction:
DIN *****2 determinate the fire classification of railway vehicle material and structure by burning behavior, smoke density, dropping behavior and toxic.DIN ****7 Big Combustion Chamber is used for Classification: S*-S5 Burning Class, ST*-ST2 Drop Class, SR*-SR2 Drop Class.
 
Note: Smoke toxic test according new version DIN *****2:***9:*5, DIN EN ISO *****2, Smoke toxic test (toxicity measured with FTIR): FED<1

Features:

1. The burning cabinet is manufactured from 2mm thick sheet steel and measure **0mm(W) x **0mm(D)x***0mm(H).
2. Two doors at the front to enable specimens to be introduced and the measuring system to be actuated and controlled.
3. Glass windows to permit the course of the test to be observed.
4. The bottom of the cabinet be formed by grating allows air to enter freely.
5. Exhaust fan having a minimum capacity of *0m3 per minute.
6. The air flow be measured by means of a pitot tube and pressure meter.
7. The inner temperature of cabinet measured by fours thermocouples.
8. A smoke measuring system, according to DIN ****5, is mounted on a separate frame at the exhaust stack. 
9. Digital display the three points temperature of stainless steel calibration plate.
10. Six timers can record the  ignition, after flame, smoldering, maximum flame height, dripping and burning time.
11. Burner, Sample holder and bracket assembly.
12. Software shows the light transmission and optical density.

1. Electrical: **5 Volts AC *0Hz / **0 Volts AC *0Hz.
2. Ambient Temperature: Operating *5°C to *5°C.
3. Dimensions: **0mm (W) x ***0mm x (H) x **0mm (D) 
4. Gas: Propane and air compressor